2.4 inch ips lcd display screen ili9341v

2.4 inch ips lcd display screen are in high demand due to their superior quality and reliability. We are 2.4 inch LCD panel suppliers and we are committed to providing the best panels to our customers all over the world. Our panels are made with the finest materials and they undergo strict quality control measures to ensure that they meet the highest standards. In addition, our panels come with a warranty so that you can be confident in their performance. We are confident that you will be satisfied with our 2.4 inch LCD panels and we look forward to serving you. Thank you for your interest in our products.

DESCRIPTION

K240B45100A is a 2.4 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees (typical).Optional RTP or CTP.

This K240B45100A module has built-in ILI9341V controller IC, supports RGB/MCU or SPI interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typ), and the contrast ratio is 800:1. This module It is an ideal choice for communication equipment, instrumentation and other industries. The module can operate at temperatures from -10°C to +60°C; its storage temperature range is -20°C to +70°C.

DRAWING

SPECIFICATIONS

General Specifications

Item	Contents	Unit
Size	2.4	inch
LCM Dimension	42.72（W）* 59.46（H） * 2.30(T)	mm
LCD Active Area	36.72* 48.96	mm
Number Of Dots	240×320	pixel
LCD Type	a-Si TFT
Viewing Direction	IPS
Driver IC	ILI9341V
Interface Type	RGB/MCU/SPI
Operating Temperature	-10℃~ 60℃
Storage Temperature	-20℃~ 70℃
Backlight Type	4 LEDs
Brightness	380	Cd/m2

Interface

LCM PIN Definition

NO.	Symbol	Description
1	NC	NC
2-5	IM0-IM3	I/O  choose
6	RESET	Reset pin
7	VS	Frame Synchronizing Signal
8	HS	Line Synchronizing Signal
9	DCLK	Dot Clock Signa
10	DEN	Data Enable Signal
11-28	DB17-DB0	Data Bus
29	SDO	Serial Data Output
30	SDI	Serial Data Input
31	RD	Read signal, rising-edge-active.
32	RS/SCL	Data/Command register address./Serial  Clock
33	WR	Write signal, rising-edge-trigger.
34	CS	Chip Select
35	TE	Frame mark.
36	VCC	POWER SUPPLY
37	VCC	POWER SUPPLY
38	GND	Ground
39	GND	Ground
40	LEDA	BACKLIGHT ANODE
41	LEDK	BACKLIGHT CATHODE
42	NC	NC
43	NC	NC
44	NC	NC
45	NC	NC

DC Characteristics

Item	Symbol	Min	Typ	Max	Unit
TFT gate on voltage	VGH	—	15	—	V
TFT gate off voltage	VGL	—	-10	—	V
TFT common electrode Voltage	Vcom	—	-1	—	V

Typical Operation Conditions

Item	Symbol	Min.	Typ.	Max.	Unit
Analog Supply Voltage	VCI	2.5	2.8	3.3	V
Digital Supply Voltage	VDD	2.5	2.8	3.3	V
I/O Supply Voltage	IOVCC	1.65	1.8/2.8	3.3	V
Input High Voltage	VIH	0.8*IOVCC	–	IOVCC	V
Input Low Voltage	VIL	0	–	0.2*IOVCC	V
Output High Voltage	VOH	0.8*IOVCC	–	–	V
Output Low Voltage	VOL	–	–	0.2*IOVCC	V

Backlight Circuit Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
LED Current	IB	60	80	—	mA
LED Voltage	Vf	2.8	3.0	3.2	V
CIE	X	0.265	0.295	0.325
	Y	0.26	0.29	0.32
Brightness of LCM	L	250	380	—	cd/m2

Reliability Test Items

Test Item	Test Condition	Test result determinant gist
High temperature storage	80±3 ℃，48H；
Low temperature storage	-30±3 ℃，48H；
High temperature storage	70±3 ℃，48H；	Inspection after 2~4hours storage at roomtemperature,
Low temperature operation	-20±3 ℃，48H；	the sample shall be free from defects:
High temperature/humidity	60℃±3 ℃,90%±3%RH ，48H；	1.Air bubble in the LCD;
Thermal Shock	~20℃/0.5h~+70℃/0.5h	2.Non-display;
	for a total 24 cycles；
Vibration Test	Frequency 10Hz~55Hz~10Hz	3.Glass crack;
	Amplitude：1.5mm, X，Y，Z
	direction for total 1H；	4. The electrical
	(Packing condition)
ESD test	±4KV, Human Body Mode,	characteristics requirements shall be satisfied.
	150pF/330Ω；
	±8KV, Air Mode, 150pF/330Ω；

Search keyword: tft 2.4″, 2.4 tft lcd, 2.4″ tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4″ tft display, 2.4 inch tft display, tft display 2.4, tft display 2.4″,tft lcd display,2.4inch lcd screen,2.4inch display screen,