2.4 inch screen lcd
►Resolution : 240×320 dots
►View Direction: IPS
►Interface: MCU
►Driver IC: ST7789V
►RTP/CTP: Optional
►Brightness(cd/m²): 380
►Outline Dimension: 42.72 * 60.26 * 2.30(mm)
DESCRIPTION
HC-240HI2201A is a 2.4 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×320 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, left: 80/right: 80/up: 80/down: 80 degrees (typical).Optional RTP or CTP.
This HC-240HI2201A module has built-in ST7789V controller IC, supports MCU interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typ), and the contrast ratio is 800:1. This module is a communication Industrial ideal for equipment, medical equipment, etc. The module can operate at temperatures from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING
SPECIFICATIONS
General Specifications
| Item | Contents | Unit |
| Size | 2.4 | inch |
| LCM Dimension | 42.72（W）* 60.26（H） * 2.30(T) | mm |
| LCD Active Area | 36.72* 48.96 | mm |
| Number Of Dots | 240×320 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | IPS | |
| Driver IC | ST7789V | |
| Interface Type | MCU | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 4 LEDs | |
| Brightness | 380 | Cd/m2 |
Interface
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | LEDA | BACKLIGHT ANODE |
| 2 | LEDK | BACKLIGHT CATHODE |
| 3 | NC | NC |
| 4 | NC | NC |
| 5 | NC | NC |
| 6 | IOVCC | I/O POWER SUPPLY |
| 7 | DB7 | Data Bus |
| 8 | DB6 | Data Bus |
| 9 | DB5 | Data Bus |
| 10 | DB4 | Data Bus |
| 11 | DB3 | Data Bus |
| 12 | DB2 | Data Bus |
| 13 | DB1 | Data Bus |
| 14 | DB0 | Data Bus |
| 15 | RD | Read signal, rising-edge-active |
| 16 | WR | Write signal, rising-edge-trigger |
| 17 | RS | Data/Command register address |
| 18 | CS | Chip enable, Low-active |
| 19 | TE | Frame mark |
| 20 | RESET | Reset pin |
| 21 | GND | Ground |
| 22 | GND | Ground |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 15 | — | V |
| TFT gate off voltage | VGL | — | -10 | — | V |
| TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 60 | 80 | mA |
| LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
| CIE | X | 0.265 | 0.295 | 0.325 | |
| Y | 0.26 | 0.29 | 0.32 | ||
| Brightness of LCM | L | 300 | 380 | cd/m2 |
Reliability Test Items
| Test Item | Test Condition | Test result determinant gist |
High temperature storage | 80±3 ℃，48H； | |
| Low temperature storage | -30±3 ℃，48H； | |
High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | -20±3 ℃，48H； | the sample shall be free from defects: |
| High temperature/humidity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h | 2.Non-display; |
| for a total 24 cycles； | ||
Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 2.4″, 2.4 tft lcd, 2.4″ tft lcd, 2.4 inch tft lcd, tft lcd 2.4, 2.4 tft display, 2.4″ tft display, 2.4 inch tft display, tft display 2.4, tft display 2.4″,tft lcd display,2.4inch lcd screen,2.4inch display screen,
