
2.8 inch tft lcd display
►Resolution : 240×400 dots
►View Direction: 12 o’clock
►Interface: RGB
►Driver IC: ILI9327
►RTP/CTP: Optional
►Brightness(cd/m²): 380
►Outline Dimension: 43.22 * 73.20* 3.05(mm)
2.8 inch tft LCD display is madeup of twisted nematic field effect in order to provide 2.8 inch tft LCD display to the world with a better resolution .
2.8 inch tft LCD display suppliers are providing 2.8 inch tft LCD display all over the world with a better view and focus on the images . 2.8 inch tft LCD display suppliers have a very good experience in 2.8 inch tft LCD display and they know how to provide 2.8 inch tft LCD display to their customers all over the world .
2.8 inch tft LCD display suppliers are very trustable and 2.8 inch tft LCD display is provided by them with good quality and 2.8 inch tft LCD display suppliers also have a warranty for 2.8 inch tft LCD display . 2.8 inch tft LCD display is available in different colors and 2.8 inch tft LCD display suppliers can provide 2.8 inch tft LCD display as per the requirement of their customers .
DESCRIPTION
H28N4009 is a 2.8 Inch TFT LCD Display Module with optional resistive touch screen and capacitive touch screen control with a resolution of 240×400 pixels. This size TFT LCD monitor is portrait mode with wider viewing angle by POL adjustment, left: 45/right: 45/up: 50/down: 20 degrees (typical).Optional RTP or CTP.
This H28N4009 module has built-in ILI9327 controller IC, supports RGB interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 380 nits (typ), and the contrast ratio is 800:1. This module is a handheld device, beauty Industrial ideal for equipment, etc. The module can operate at temperatures from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING

SPECIFICATIONS
General Specifications
Item | Contents | Unit |
Size | 2.8 | inch |
LCM Dimension | 43.22(W)* 73.20(H) * 3.05(T) | mm |
LCD Active Area | 36.72* 61.20 | mm |
Number Of Dots | 240×400 | pixel |
LCD Type | a-Si TFT | |
Viewing Direction | 12 o’clock | |
Driver IC | ILI9327 | |
Interface Type | RGB | |
Operating Temperature | -20℃~ 70℃ | |
Storage Temperature | -30℃~ 80℃ | |
Backlight Type | 4 LEDs | |
Brightness | 380 | Cd/m2 |
Interface
LCM PIN Definition
NO. | Symbol | Description |
1 | LED-A | BACKLIGHT ANODE |
2 | LED-K | BACKLIGHT CATHODE |
3 | NC | NC |
4 | GND | Ground |
5 | RESET | Reset pin |
6 | VSYNC | Frame Synchronizing Signal |
7 | HSYNC | Line Synchronizing Signal |
8 | DCLK | Dot Clock Signa |
9 | DEN | Data Enable Signal |
10-15 | R5-R0 | Data Bus |
16-21 | G5-G0 | Data Bus |
22-27 | B5-B0 | Data Bus |
28 | SDO | Serial Data Output |
29 | SDI | Serial Data Input |
30 | SCL | Serial Clock |
31 | CS | Chip Select |
32 | TE | Not Connect |
33 | VCC | POWER SUPPLY |
34 | GND | Ground |
35 | TP-SDA | TP-Serial Data Input |
36 | TP-SCL | TP- Serial Clock |
37 | TP-RST | TP- Reset pin |
38 | TP-EINT | TP-EINT DATA SIGNAL |
39 | GND | Ground |
40 | TP-AVDD | TP And LCM Power supply |
DC Characteristics
Item | Symbol | Min | Typ | Max | Unit |
TFT gate on voltage | VGH | — | 15 | — | V |
TFT gate off voltage | VGL | — | -7.5 | — | V |
TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
Item | Symbol | Min. | Typ. | Max. | Unit |
Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
Item | Symbol | Min. | Typ. | Max. | Unit |
LED Current | IB | — | 60 | 80 | mA |
LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
CIE | X | 0.265 | 0.295 | 0.325 | |
Y | 0.26 | 0.29 | 0.32 | ||
Brightness of LCM | L | — | 380 | — | cd/m2 |
Reliability Test Items
Test Item | Test Condition | Test result determinant gist |
High temperature storage | 80±3 ℃,48H; | |
Low temperature storage | ~30±3 ℃,48H; | |
High temperature storage | 70±3 ℃,48H; | Inspection after 2~4hours storage at roomtemperature, |
Low temperature operation | ~20±3 ℃,48H; | the sample shall be free from defects: |
High temperaturehumi/dity | 60℃±3 ℃,90%±3%RH ,48H; | 1.Air bubble in the LCD; |
Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles; |
2.Non-display; |
Vibration Test |
Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
Amplitude:1.5mm, X,Y,Z | ||
direction for total 1H; | 4. The electrical | |
(Packing condition) | ||
ESD test |
±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
150pF/330Ω; | ||
±8KV, Air Mode, 150pF/330Ω; |
Search keyword: tft 2.8″, 2.8 tft lcd, 2.8″ tft lcd, 2.8 Inch TFT LCD Display Module, tft lcd 2.8, 2.8 tft display, 2.8″ tft display, 2.8 inch tft display, tft display 2.8, tft display 2.8″,tft lcd display,2.8inch lcd screen,2.8inch display screen,