
3.5 inch lcd display
►Resolution : 320×480 dots
►View Direction: IPS
►Interface: RGB(18bit)
►Driver IC: ST7796S
►Brightness(cd/m²): 480
►Outline Dimension: 54.48 * 84.71 * 2.3(mm)
►RTP/CTP: Optiona
3.5 inch tft lcd display rgb interface suppliers play an important role in the market for 3.5 inch LCD displays. 3.5 inch lcd display suppliers provide 3.5 inch lcd displays to various industries all over the world.
3.5 inch lcd display suppliers are responsible for the production and distribution of 3.5 inch lcd displays. 3.5 inch lcd display suppliers have a wide range of products that they offer to their customers.
3.5 inch lcd display suppliers offer a variety of services that include, but are not limited to, design, development, testing, and marketing of 3.5 inch lcd displays. 3.5 inch lcd display suppliers offer a wide range of 3.5 inch lcd displays to their customers all over the world.
DESCRIPTION
H35J4502 is a 3.5inch LCD display in Italy display module with optional resistive touch screen and capacitive touch screen control with a resolution of 320×480 pixels. This size TFT LCD monitor is portrait mode, TFT panel adopts IPS panel, Left: 80/Right: 80/ Top: 80/ Bottom: 80 degrees (typical). Optional RTP or CTP.
This H35J4502 module has built-in ST7796S controller IC, supports RGB (18bit) interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 480 nits (typ), and the contrast ratio is 800:1. The module is Ideal for industries such as beauty equipment, communication equipment, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C
DRAWING

SPECIFICATIONS
General Specifications
Item | Contents | Unit |
Size | 3.5 | inch |
LCM Dimension | 54.48(W)* 84.71(H) * 2.3(T) | mm |
LCD Active Area | 48.96 * 73.44 | mm |
Number Of Dots | 320×480 | pixel |
LCD Type | a-Si TFT | |
Viewing Direction | IPS | |
Driver IC | ST7796S | |
Interface Type | RGB(18bit) | |
Operating Temperature | -20℃~ 70℃ | |
Storage Temperature | -30℃~ 80℃ | |
Backlight Type | 6 LEDs | |
Brightness | 480 | cd/m2 |
Interface
LCM PIN Definition
NO. | Symbol | Description |
1 | GND | Ground |
2 | LEDA | BACKLIGHT ANODE |
3 | LEDA | BACKLIGHT ANODE |
4 | LEDK | BACKLIGHT CATHODE |
5 | LEDK | BACKLIGHT CATHODE |
6 | GND | Ground |
7 | GND | Ground |
8 | VCC | POWER SUPPLY |
9 | IOVCC | I/O POWER SUPPLY |
10 | RESET | Reset pin |
11 | VSYNC | Frame Synchronizing Signal |
12 | HSYNC | Line Synchronizing Signal |
13 | GND | Ground |
14 | DOTCLK | Dot Clock Signa |
15 | GND | Ground |
16 | DE | Data Enable Signal |
17-34 | DB17-DB0 | Data Bus |
35 | SDO | Serial Data Output |
36 | SDI | Serial Data Input |
37 | RD | Read signal, rising-edge-active. |
38 | WR/SCL | Write signal, rising-edge-trigger./Serial Clock |
39 | D/CX | Data/Command registor selection. |
40 | CS | Chip Select |
41 | TE | Frame mark. |
42 | XR | Touch Panel Right |
43 | YD | Touch Panel Down |
44 | XL | Touch Panel Left |
45 | YU | Touch Panel Up |
DC Characteristics
Item | Symbol | Min | Typ | Max | Unit |
TFT gate on voltage | VGH | 14.5 | 15 | 15.5 | V |
TFT gate off voltage | VGL | -10.5 | -10 | -9.5 | V |
TFT common electrode Voltage | Vcom | — | -1.18 | — | V |
Typical Operation Conditions
Item | Symbol | Min. | Typ. | Max. | Unit |
Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
Item | Symbol | Min. | Typ. | Max. | Unit |
LED Current | IB | – | 20 | – | mA |
LED Voltage | Vf | 18.60 | — | 19.20 | V |
CIE | X | 0.305 | 0.335 | 0.365 | |
Y | 0.345 | 0.375 | 0.395 | ||
Brightness of LCM | L | 350 | 480 | cd/m2 |
Reliability Test Items
Test Item | Test Parameters | Key factors for determining test results |
High temperature storage | 80±3 ℃,48H; | |
Low temperature storage | -30±3 ℃,48H; | |
High temperature storage | 70±3 ℃,48H; | Inspection after 2~4hours storage at roomtemperature, |
Low temperature operation | -20±3 ℃,48H; | the sample shall be free from defects: |
High temperature/humidity | 60℃±3 ℃,90%±3%RH ,48H; | 1.Air bubble in the LCD; |
Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles; |
2.Non-display; |
Vibration Test |
Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
Amplitude:1.5mm, X,Y,Z | ||
direction for total 1H; | 4. The electrical | |
(Packing condition) | ||
ESD test |
±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
150pF/330Ω; | ||
±8KV, Air Mode, 150pF/330Ω; |
Search keyword: tft 3.5″, 3.5 tft lcd, 3.5″ tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5inch LCD display in Italy, 3.5″ tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5″,tft lcd display,3.5inch lcd screen,3.5inch display screen,