3.5 inch lcd display screen
►Resolution : 320×480 dots
►View Direction: 12 o’clock
►Interface: SPI
►Driver IC: ILI9488
►Brightness(cd/m²): 480
►Outline Dimension: 54.48 * 84.71 * 2.30 （mm）
►RTP/CTP: Optional
DESCRIPTION
K350C20301 is a 3.5 inch tft LCD module with optional resistive touch screen and capacitive touch screen control with a resolution of 320×480 pixels. This size TFT LCD is in portrait mode with wider viewing angle by POL adjustment, Left: 70 / Right: 70 / Top: 60 / Bottom: 60 degrees (typical). Optional RTP or CTP.
This K350C20301 module has built-in ILI9488 controller IC, supports SPI interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 480 nits (typ), and the contrast ratio is 800:1. Ideal for industries such as electrical appliances. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING
SPECIFICATIONS
General Specifications
| Item | Contents | Unit |
| Size | 3.5 | inch |
| LCM Dimension | 54.48（W）* 84.71（H） * 2.30(T) | mm |
| LCD Active Area | 48.96* 73.44 | mm |
| Number Of Dots | 320×480 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | 12 o’clock | |
| Driver IC | ILI9488 | |
| Interface Type | SPI | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 6 LEDs | |
| Brightness | 480 | cd/m2 |
Interface
LCM PIN Definition
| NO. | Symbol | Description |
| 1 | LEDK | BACKLIGHT CATHODE |
| 2 | LEDA | BACKLIGHT ANODE |
| 3 | GND | Ground |
| 4 | RESET | Reset pin |
| 5 | SDA | Serial Data Input |
| 6 | SCL | Serial Clock |
| 7 | RS | Destination register selection. |
| 8 | CS | Chip Select |
| 9 | TE | Frame mark. |
| 10 | GND | Ground |
| 11 | IOVCC | I/O POWER SUPPLY |
| 12 | VCC | POWER SUPPLY |
| 13 | GND | Ground |
| 14 | GND | Ground |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | NC | NC |
| 18 | NC | NC |
| 19 | NC | NC |
| 20 | NC | NC |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 15 | — | V |
| TFT gate off voltage | VGL | — | -10 | — | V |
| TFT common electrode Voltage | Vcom | — | -1 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 90 | 120 | mA |
| LED Voltage | Vf | 2.8 | 3.0 | 3.2 | V |
| CIE | X | 0.265 | 0.295 | 0.325 | |
| Y | 0.26 | 0.29 | 0.32 | ||
| Brightness of LCM | L | — | 480 | — | cd/m2 |
Reliability Test Items
| Test Item | Test Parameters | Key factors for determining test results |
| High temperature storage | 80±3 ℃，48H； | |
| Low temperature storage | -30±3 ℃，48H； | |
| High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | -20±3 ℃，48H； | the sample shall be free from defects: |
| High temperature/humidity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h for a total 24 cycles； | 2.Non-display; |
|
Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
|
ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 3.5″, 3.5 tft lcd, 3.5″ tft lcd, 3.5 inch tft lcd, tft lcd 3.5, 3.5 tft display, 3.5″ tft display, 3.5 inch tft display, tft display 3.5, tft display 3.5″,tft lcd display,3.5inch lcd screen,3.5inch display screen,
