7.0 inch tft display
►Resolution : 1024×600 dots
►View Direction: 6 o`clock
►Interface: MIPI 2 Lanes
►Driver IC: EK79007AD+EK73217BCGA
►RTP/CTP: Optional
►Brightness(cd/m²): 500
►Outline Dimension: 164.30 * 97.00 * 2.60（mm）
DESCRIPTION
HC-700BE2502 is a 7.0 inch tft LCD display module with optional resistive touch screen and capacitive touch screen control with a resolution of 1024×600 pixels. This size TFT LCD is in portrait mode with wider viewing angle by POL adjustment, Left: 70 / Right: 70 / Top: 60 / Bottom: 60 degrees (typical). Optional RTP or CTP.
This HC-700BE2502 module has built-in EK79007AD+EK73217BCGA controller IC, supports MIPI 2 Lanes interface, the power supply voltage (VCC) range is 3.0V to 3.6V, the brightness is 500 nits (typ), and the contrast ratio is 800:1. The Modules are ideal for industries such as beauty equipment, communication equipment, instrumentation, etc. The module can operate from -20°C to +70°C; its storage temperature range is -30°C to +80°C.
DRAWING
SPECIFICATIONS
General Specifications
| Item | Contents | Unit |
| Size | 7 | inch |
| LCM Dimension | 164.30（W）* 97.00（H） * 2.60(T) | mm |
| LCD Active Area | 154.21 * 85.92 | mm |
| Number Of Dots | 1024×600 | pixel |
| LCD Type | a-Si TFT | |
| Viewing Direction | 6 o`clock | |
| Driver IC | EK79007AD+EK73217BCGA | |
| Interface Type | MIPI 2 Lanes | |
| Operating Temperature | -20℃~ 70℃ | |
| Storage Temperature | -30℃~ 80℃ | |
| Backlight Type | 21 LEDs | |
| Brightness | 500 | cd/m2 |
| CTP Dimension | 164.90 * 100.00 * 4.70 | mm |
| CTP Structure | G+G | |
| Driver IC for CTP | GT911 |
Interface Function
LCM PIN Definition
| NO. | PIN | Description |
| 1 | LED-A | POWER SUPPLY ANODE FOR BACKLIGHT |
| 2 | LED-K | POWER SUPPLY CATHODE FOR BACKLIGHT |
| 3 | VCC(2.8) | POWER SUPPLY（2.8V） |
| 4 | IOVCC(1.8) | I/O POWER SUPPLY（1.8V） |
| 5 | GND | Ground |
| 6 | CLKP | MIPI-DSI CLOCK differential signal input pin |
| 7 | CLKN | MIPI-DSI CLOCK differential signal input pin |
| 8 | GND | Ground |
| 9 | D0N | MIPI-DSI Data differential signal input pins. (Data lane 0) |
| 10 | D0P | MIPI-DSI Data differential signal input pins. (Data lane 0) |
| 11 | GND | Ground |
| 12 | D1N | MIPI-DSI Data differential signal input pins. (Data lane 1) |
| 13 | D1P | MIPI-DSI Data differential signal input pins. (Data lane 1) |
| 14 | GND | Ground |
| 15 | NC | Not Connect |
| 16 | NC | Not Connect |
| 17 | GND | Ground |
| 18 | NC | Not Connect |
| 19 | NC | Not Connect |
| 20 | GND | Ground |
| 21 | TE | Serves TE (Tearing Effect ) pin on MPU interface |
| 22 | LCD-ID | Not Connect |
| 23 | RES | Reset pin |
| 24 | GND | Ground |
| 25 | GND | Ground |
| NO. | PIN | Description |
| 1 | GND | Ground |
| 2 | SCL | I2C Clock Singal |
| 3 | SDA | I2C Data Singal |
| 4 | INT | Interrupt Singal |
| 5 | RESET | Reset Pin For CTP |
| 6 | NC | Not Connect |
| 7 | VDD | POWER SUPPLY（3.3V） |
| 8 | NC | Not Connect |
DC Characteristics
| Item | Symbol | Min | Typ | Max | Unit |
| TFT gate on voltage | VGH | — | 18 | — | V |
| TFT gate off voltage | VGL | — | -6 | — | V |
| TFT common electrode Voltage | Vcom | — | 3.85 | — | V |
Typical Operation Conditions
| Item | Symbol | Min. | Typ. | Max. | Unit |
| Analog Supply Voltage | VCI | 2.5 | 2.8 | 3.3 | V |
| Digital Supply Voltage | VDD | 2.5 | 2.8 | 3.3 | V |
| I/O Supply Voltage | IOVCC | 1.65 | 1.8/2.8 | 3.3 | V |
| Input High Voltage | VIH | 0.8*IOVCC | – | IOVCC | V |
| Input Low Voltage | VIL | 0 | – | 0.2*IOVCC | V |
| Output High Voltage | VOH | 0.8*IOVCC | – | – | V |
| Output Low Voltage | VOL | – | – | 0.2*IOVCC | V |
Backlight Circuit Characteristics
| Item | Symbol | Min. | Typ. | Max. | Unit |
| LED Current | IB | — | 140 | — | mA |
| LED Voltage | Vf | 8.5 | 9.3 | 10.6 | V |
| CIE | X | 0.265 | 0.285 | 0.335 | |
| Y | 0.26 | 0.28 | 0.33 | ||
| Brightness of LCM | L | — | 500 | — | cd/m2 |
Reliability Test Items
| Test Item | Test Condition | Test result determinant gist |
|
High temperature storage |
80±3 ℃，48H； | |
| Low temperature storage | -30±3 ℃，48H； | |
| High temperature storage | 70±3 ℃，48H； | Inspection after 2~4hours storage at roomtemperature, |
| Low temperature operation | -20±3 ℃，48H； | the sample shall be free from defects: |
| High temperature/humidity | 60℃±3 ℃,90%±3%RH ，48H； | 1.Air bubble in the LCD; |
| Thermal Shock | ~20℃/0.5h~+70℃/0.5h | 2.Non-display; |
| for a total 24 cycles； | ||
|
Vibration Test | Frequency 10Hz~55Hz~10Hz | 3.Glass crack; |
| Amplitude：1.5mm, X，Y，Z | ||
| direction for total 1H； | 4. The electrical | |
| (Packing condition) | ||
|
ESD test | ±4KV, Human Body Mode, | characteristics requirements shall be satisfied. |
| 150pF/330Ω； | ||
| ±8KV, Air Mode, 150pF/330Ω； |
Search keyword: tft 7.0″, 7.0 tft lcd, 7.0″ tft lcd, 7.0 inch tft lcd, tft lcd 7.0, 7.0 tft display, 7.0″ tft display, 7.0 inch tft display, tft display 7.0, tft display 7.0″,
